   |
PM961 Series
(M.2 PCIe Gen3 SSD)
|
|
SAMSUNG M.2 (NGFF) PCIe Gen3 SSD
PM961 Series (NVMe)
PM961-NVMe-128G
Unit price: USD 55. |
|
|
| PART NUMBER |
PM961-NVMe-128G
(MZVLW128HEGR) |
 |
| Capacity1) |
128GB |
| LBA2) |
250,069,680 |
Warranty Policy:
Our web shop follow Samsung Warranty Policy.
The warranted period will be count 12 Months after SAMSUNG production date.
Customer are responsible for the freight shipping back and forth. |
Hotfix for windows 8.1
https://support.microsoft.com/zh-cn/kb/2897143
Hotfix for windows 7, server2008 R2
https://support.microsoft.com/en-us/kb/2990941
|
Heat Sink 2x1.5cm
Unit price: USD 2. |
|
|
Heat Sink 2x1.5cm 5pcs
 |
|
PM961 Series (NVMe)
| Performance1) |
| Drive Performance |
| Parameter |
Unit |
Queue Depth |
128GB |
Sequential Read2)
(Up to) |
MB/s |
QD = 32 |
2800 |
Sequential Write2)
(Up to) |
MB/s |
QD = 32 |
600 |
Random Read3)
(Up to) |
IOPS |
QD = 1 |
10K |
| IOPS |
QD = 32 |
140K |
Random Write3)
(Up to) |
IOPS |
QD = 1 |
40K |
| IOPS |
QD = 32 |
40K |
NOTE:
1) Performance measured using CDM 5.0.2 on Windows 8.1 64bit. Actual performance may vary depending on use conditions and environment
2) Sequential performance measured using 128KB data size. (QD=32 by Thread=1)
3) Random performance measured using 4KB data size. (QD=32 by Thread 4, QD=1 by Thread 1)
4) Performance measurements based on TurboWrite technology |
Power
| Maximum Ratings |
| Parameter |
Specifications |
| Supply Voltage |
Allowable voltage |
3.3V ± 5% |
| Allowable noise/ripple |
100mV p-p or less |
| Power Consumption for M.2 (3.3V Supply) |
| Parameter |
Specifications |
| Power Consumption |
Active1 (Typical, RMS) |
Read |
6.1W |
| Write |
5.1W |
| Idle2 (Typical) |
450mW |
| L1.23 (Typical) |
5mW |
NOTE:
1) Active power is measured on sequential write and read.
2) Idle Power is measured on Idle status with L0+APST on.
3) If L1.2 time logging option is enabled, L1.2 Power could be 5mW. |
MTBF
MTBF is Mean Time Between Failure, and is the predicted elapsed time between inherent failures of a system during operation. As same word,
AFR (annual failure ratio) is 0.4%. MTBF can be calculated as the arithmetic average time between failures of a system. |
| MTBF Specifications |
| Capacity |
MTBF |
| 128GB |
1,500,000 Hours |
UBER
| UBER is Uncorrectable Bit Error Rate. |
| UBER Specifications |
| Parameter |
Specification |
| UBER |
< 1 sector per 1015 bits read |
Environmental Specification
| Temperature, Humidity, Shock, Vibration |
| UBER Specifications |
| Parameter |
Mode |
Specification |
| Temperature (Tc) |
Operating1) |
0°C to 70°C |
| Non-operating |
-40°C to 85°C |
| Humidity2) |
Non-operating |
5% to 95% |
| Shock3) |
Non-operating |
1500G |
| Vibration4) |
Non-operating |
20G |
NOTE:
1) Temperature is measured by SMART Temperature. Proper airflow recommended
2) Humidity is measured in non-condensing
3) Test condition for shock: 0.5ms duration with half sine wave
4) Test condition for vibration: 10Hz to 2000Hz |
Physical dimensions and Weight
| Parameter |
Value |
| Width |
22.00 ± 0.15 mm |
| Length |
80.00 ± 0.15 mm |
| Thickness |
Max. 2.38 mm |
| Weight |
128GB |
Max 8g |
|
|
|
